tutorial: sewing a fabric scarf – the cheater / fabric saving way
Ok, so I promised a tutorial for my plaid scarf in this post:
Normally, when you want to make a fabric scarf, the process is pretty straightforward: you cut off a piece of fabric that is between 2 and 3 yards long in the width you like, hem all raw edges and be done. This would leave you with lots of excess fabric.
But what do you do when you don’t have two or three yards of the fabric you want to use, or the fabric is expensive and you can’t afford much? I really wanted a plaid scarf, but I couldn’t find one I liked and this plaid flannel was pretty dear. I just didn’t want to buy 3 yards of it, so I only bought 1 yard and made my scarf this way:
Your piece of fabric is 55″ (or 44″ depending on the fabric) by 36″ (1 yard). You want the longest sides to stay, so you divide your fabric in two halfs of 55″ by 18″ (the 18″ will be plenty width).
I drew the rest of the process up for you (click on the image to inlarge):
I promise you will not see the seam on the right side of the fabric at all, if you take care to match your pieces and if you use a thread in the color of your fabric. Obviously I forgot to match my plaids, but still, the seam is only visible when the scarf is laid out flat:
Your scarf will be pretty long and you have lots of options to wear it. Here’s how I do it:
I fold it in half, wrap the open end around my neck once, pull it through the looped other end and tuck the end under the loop. I really really love my long, comfy scarf in that soft soft flannel and I wear it all the time. It’s perfect for spring too, because the flannel is light yet warm enough for chilly mornings.
Done! Have fun sewing light fabric scarves for summer!